In Bitron we believe that the optimization of the layout and the attention to the assembly process of our customers are key success factors to keep them competitive in the fast-changing market of heat pumps. Bitron’s experience in the system integration together with the know how on heating and cooling water circuits are the basis for the Heat Pumps of the future.
Description
This 3 way valve in composite has been designed for multiple applications such as Heat Pumps, High Power Boilers and other systems where a Kv factor equal to 8 is needed. The long lasting experience of Bitron ensures its reliability and the customized used in it makes it very competitive and interesting.
Key features:
- Kv > 8 m3/h
- Body: Plastic
- Switch Time: 6 SEC ON (Push) – 4 SEC. OFF (Pull)
- ON/OFF Motor Rated Voltage : 220/240, 110/120VAC - 24, 12VDC
- ON/Off Motor Electrical Connection: RAST 2.5 PITCH 5 MM IP44 with Bitron Connector
- Quick Connections: Ø 26,6 MM
Heat pumps
Boilers
Description
This 3 way valve in brass has been designed for multiple applications such as Heat Pumps, High Power Boilers and other systems where a Kv factor equal to 8 is needed. The long lasting experience of Bitron ensures its reliability and the brass used in it has been chosen to give the maximum flexibility to customers in the choice of the material.
Key features:
- Kv > 8 m3/h
- Body: Brass
- Switch Time: 6 SEC ON (Push) – 4 SEC. OFF (Pull)
- ON/OFF Motor Rated Voltage : 220/240, 110/120VAC - 24, 12VDC
- ON/OFF Motor Electrical Connection: RAST 2.5 Pitch 5 MM IP44 with Bitron Connector
- Quick Connections: Ø 26,6 MM
Heat pumps
Boilers
Description
This Sensor is able to measure the differential pressure between two connections through an inductive technology. This component can be applied to check the correct activation of the pumps or to measure the flow by correlation.
Key features:
- Ambient Temperature: 2-60°C
- Water Temperature: from 2°C TO 90°C
- Typical Output Signal: Proportional V TO DP
- Power Supply: 5V
- Current Consumption: <6MA
- Electrical Connections: Rast 2,5
- Calibration: Seven Points Possible
Heat pumps
Boilers
The ultrasonic flow meter is able to measure a fluid's flow through the measurement of the average speed of several ultrasonic beams emitted against the flow by a transducer. The flow measurement can be influenced by Temperature, Density, viscosity and suspended particles, but taking these interaction into account it can give a remarkable tolerance compared to other solutions.
Key Features:
- Medium: Heating Water, Water In Range Clear To Polluted With Small Particles (For Example Flakes Of Magnetite and/or Scale) and Additives
- Medium Temperature: 2°C -> 95°C
- Medium Pressure: 0 -> 3BAR
- Ambient Temperature: 2°C -> 70°C
- Flow Measurement Range: 200l/H – 2800l/H
- Tolerance: +/-2% Of Max Flowrate
- Flow Coefficient: >Kv8
- Power Supply: 5vdc
- Electrical Connection: Rast 2,5
- Hydraulic Connection: Clip + O-ring 28,25mm X 2,62mm
Heat pumps
Boilers
Description
This standard hydraulic group, thanks to the many interfaces, can integrate many functions with a simple and flexible approach. This can integrate by the others functions such as: pressure sensor, PRV, NTC, Drain Tap, air venting, expansion vessel connection and many others. The 1 inch connections ensure low pressure drops.
Heat pumps