Solutions for hydrogen applications in various industries
Aware of the new energy challenges affecting our world, Bitron is convinced of the need to use different energies, suitable for each use, leaving the possibility of using hybrid solutions. Indeed, hydrogen is an attractive alternative energy that meets certain needs in transportation, industry, heating and auxiliary power generation. We have therefore developed a first range of low-pressure hydrogen solenoid valves for fuel cells, based on our long experience in solenoids. For stack cooling, we also offer a modular 2- to 4-way actuator with different flow rates.
Add Values
2/2 ways normally closed Proportional Solenoid Valve. Mobile fuel cell medium pressure flow control valve placed between the hydrogen storage/supply system and the hydrogen. The performance of a fuel cell is determined by the amount of the fuel to cell stack. Patented design to minimize friction maximizing reliability.
Key features:
- Pilot Operated Solenoid Valve in H2 Medium
- Up to 20 bar_A
- Up to 4,0 g/s
- Type of Voltage: DC / PWM
- External Leakage max: 1x10-5 mbar l/s
- Nominal Width: 1,8 mm – 2,6 mm – 3,2 mm
- Ambient Temperature: -40ºC to 95ºC
- Low level of Friction
- Excellent linearity with
- Soft opening proportional
2/2 Ways Normally Closed ON-OFF Valve. Mobile Fuel Cell Low Pressure solenoid Valve placed in the recirculation system or in the water trap. In the fuel cell, water is a result of a hydrogen/oxygen reaction, Its necessary to drain it.
Key features:
- Direct Acting Solenoid Valve H20 / H2 / Steam
- Up to 2,5 bar_A
- Type of Voltage: DC / PWM
- External Leakage max: 1x10-2 mbar l/s
- Nominal Width: 6 mm
- Ambient Temperature: -40ºC to 110 ºC
- Fast Drainage
- Medium fully isolated
- Compact Cartridge interface
2/2 ways normally closed ON-OFF Solenoid Valve. Mobile fuel cell medium pressure shut off valve placed between the hydrogen storage/supply system and the cell stack. Light weight patented design to maximize performances.
Key features:
- Pilot Operated Solenoid Valve in H2 Medium
- Up to 20 bar_A
- Type of Voltage: DC / PWM
- External Leakage max : 1x10-5 mbar l/s
- Nominal Width: 6 mm
- Ambient Temperature: -40ºC to 95ºC
- Low level of Drop pressure
- Low Level of Noise
Multi way valve for proportional regulation of the coolant flow in BEV, PHEV and FCE vehicles.
Key features:
- Size ( inner Spigot–Ø ): 32 mm
- Type of Voltage: DC
- Nominal voltage range: 9-16 and 18,5 – 32 V
- Operating current consumption: < 1 A
- Peak Current consumption: < 1,5 A
- EMC compliance: ECE R10
- Absolute position feedback (via LIN or PWM)
- Smart piloting with: LIN 2.X or PWM
- Weight: < 800 gm
- Working pressure range: 1 - 2,5 bar ( g )
- Burst pressure: 6 bar without damages
- Protection Class: IP6K9
- Internal leakage rate: 1L/h at nominal flow rate
- Nominal flow rate: 160L/min
- Max flow rate: 250L/min
- Switching time: 2-3s for 90º
- Working temp. range: -40ºC up to 100ºC
- Not for 100% ED use
Multi way valve for proportional regulation of the coolant flow in BEV, PHEV and FCE vehicles.
Key features:
- Size ( inner Spigot–Ø ): 15 mm
- Type of Voltage: DC
- Nominal voltage range: 9-16 V and 18,5 – 32 V
- Operating current consumption: 0,5 A
- Peak Current consumption: 1,2 A
- EMC compliance: ECE R10
- Absolute position feedback (via LIN or PWM)
- Smart piloting with: LIN 2.X or PWM
- Weight: 425 gm
- Working pressure range: 1-4 bar ( g )
- Burst pressure: 15 bar without damages
- Protection Class: IP6K9
- Internal leakage rate: 1L/h at nominal flow rate
- Nominal flow rate: 40L/min
- Max flow rate: 80L/min
- Switching time: 2-3s for 90º
- Working temp. range: -40ºC up to 100ºC
- Not for 100% ED use
Multi way valve for proportional regulation of the coolant flow in BEV, PHEV and FCE vehicles.
Key features:
- Size ( inner Spigot–Ø ): 15 mm
- Type of Voltage: DC
- Nominal voltage range: 9-16 V and 18,5 – 32 V
- Operating current consumption: 0,5 A
- Peak Current consumption: 1,2 A
- EMC compliance: ECE R10
- Absolute position feedback (via LIN or PWM)
- Smart piloting with: LIN 2.X or PWM
- Weight: 425 gm
- Working pressure range: 1-4 bar ( g )
- Burst pressure: 15 bar without damages
- Protection Class: IP6K9
- Internal leakage rate: 1L/h at nominal flow rate
- Nominal flow rate: 40L/min
- Max flow rate: 80L/min
- Switching time: 2-3s for 90º
- Working temp. range: -40ºC up to 100ºC
- Not for 100% ED use
Multi way valve for proportional regulation of the coolant flow in BEV, PHEV and FCE vehicles.
Key features:
- Size ( inner Spigot–Ø ): 22 mm
- Type of Voltage: DC
- Nominal voltage range: 9-16 V and 18,5 – 32 V
- Operating current consumption: 0,5 A
- Peak Current consumption: 1,2 A
- EMC compliance: ECE R10
- Absolute position feedback (via LIN or PWM)
- Smart piloting with: LIN 2.X or PWM
- Weight: 500 gm
- Working pressure range: 1-4 bar ( g )
- Burst pressure: 15 bar without damages
- Protection Class: IP6K9
- Internal leakage rate: 1L/h at nominal flow rate
- Nominal flow rate: 80L/min
- Max flow rate: 170L/min
- Switching time: 2-3s for 90º
- Working temp. range: -40ºC up to 100ºC
- Not for 100% ED use