ENG

As of October 1, 2023, the BORGO 4.0 - BITRON LAB project, financed by the CAMPANIA REGION through POR FESR CAMPANIA 2014/2020 and FSC - Fondo per lo Sviluppo e la Coesione della REGIONE CAMPANIA funds - in implementation of DGR 277/2022, becomes operational.


With this project, Bitron Salerno has launched a facility dedicated to supporting research and technology transfer in the area of E-Mobility issues, through the systemization of technical skills, instrumentation and specific equipment to realize the entire development cycle of electromechanical and electronic systems.


Prominent among the various areas developed for design, testing and validation is the Product Validation Laboratory consisting of two testing areas: the EMC & Electric area and the Environmental area.


The EMC area boasts pre-compliance testing of Electromagnetic Compatibility through a SAC3 - Certified Semi-Anechoic Chamber with specimen up to 2m x 2m and standard distance of 3m. Irradiated Immunity and Emission tests are complemented by Conducted Immunity and Emission duals for all Automotive and Industrial standards.


The Environmental area is able to perform almost all Endurance tests through: a series of the latest generation of climatic chambers with dimensions up to 1000 L and speed of 15° k/min; thermal shock chamber; dust IP chamber; water IP chamber for grades X4K, X5, X6, X6K through a 60 cm arc in addition to having the structure prepared for grade 9K.


All this was also possible thanks to the internal investments that the Bitron Group has made, demonstrating once again, together with the Management, an important commitment to the issues of Research and Development and the enhancement of the territory, going so far as to hire 40 people of whom 35% are women and more than 50% are under 35.

ITA

Dal 1° ottobre 2023 il progetto BORGO 4.0 – BITRON LAB, finanziato dalla REGIONE CAMPANIA attraverso i fondi POR FESR CAMPANIA 2014/2020 e FSC – Fondo per lo Sviluppo e la Coesione della REGIONE CAMPANIA - in attuazione del DGR 277/2022, diventa operativo.

Con questo progetto Bitron Salerno ha avviato una facility dedicata al supporto della ricerca e trasferimento tecnologico nell’ambito delle tematiche della E-Mobility, attraverso la messa a sistema di competenze tecniche, strumentazioni e attrezzature specifiche per realizzare l’intero ciclo di sviluppo di sistemi elettromeccanici ed elettronici.

Tra le diverse aree sviluppate per la progettazione, sperimentazione e validazione, spicca il Laboratorio di Validazione Prodotto composto da due aree di test: l’area EMC & Electric e l’area Environmental.

L’area EMC vanta la possibilità di effettuare test pre-compliance di Compatibilità Elettromagnetica attraverso una SAC3 - Camera Semi-Anecoica certificata con provino fino a 2m x 2m e distanza standard di 3m. I test di Immunità ed Emissione Irradiate sono completati dai duali di Immunità ed Emissione Condotte per tutti gli standard Automotive e Industrial.

L’area Environmental è in grado di effettuare quasi tutte le prove di Endurance attraverso: una serie di camere climatiche di ultimissima generazione con dimensioni fino a 1000 L e velocità di 15° k/min; camera thermal shock; camera IP polvere; camera IP acqua per i gradi X4K, X5, X6, X6K attraverso un arco da 60 cm oltre ad avere la struttura predisposta per il grado 9K.

Il tutto è stato possibile grazie anche agli investimenti interni che il Gruppo Bitron ha effettuato, dimostrando nuovamente, insieme al Management, un importante commitment sulle tematiche della Ricerca e Sviluppo e della valorizzazione del territorio, arrivando ad assumere 40 persone di cui il 35 % donne e più del 50% under 35.